Hlavní stránka > Výsledky hledání: keywords:"single specimen approach"
Hledej:
Tipy pro vyhledávaní :: Rozšířené hledání
Hledej ve sbírkách:
Seřadit podle: Zobrazit výsledky: Výstupní formát:
Národní úložiště šedé literatury Nalezeno 2 záznamů.  Hledání trvalo 0.00 vteřin. 
Modelling of ductile fracture for sub-sized three-point-bend geometry
 Stratil, Luděk ; Hadraba, Hynek ; Kozák, Vladislav ; Dlouhý, Ivo
The contribution deals with the simulation of R-curve using complete Gurson model of ductile fracture. The R-curve was experimentally determined for a Eurofer97 steel on sub-sized three-point-bend geometry in previous study. To apply complete Gurson model the parameters describing the voids´ behaviour and characteristic length parameter need to be determined. The nucleation parameters were identified by single specimen method of smooth tensile test specimen and from metallographic examination of fracture micro-mechanism. The characteristic length parameter was derived by fitting load versus deflection curves of sub-sized specimens. The simulations of the tests were carried out by software ABAQUS in Standard and Explicit modules. The identification was supported by parametric studies. Comparing experimental and simulated R-curve the ductile tearing was not successfully achieved. Insufficient calibrated parameters as a result non-uniqueness problem of single specimen method were found.
Úplný záznam
A simulation of R-curve by complete Gurson model
 Stratil, Luděk ; Hadraba, Hynek ; Kozák, Vladislav ; Dlouhý, Ivo
The contribution deals with the simulation of R-curve using completed Gruson model of ductile fracture. The R-curve was experimentally determined for a Eurofer97 steel in previous study. The simulations of the tests were carried out by FEM software ABAQUS 6.11 in Standard and Explicit modules. The Gurson parameters were identified by single specimen method of smooth tensile test specimen and from metallographic examination of fracture micro-mechanism. The identification was supported by parametric studies. Comparing experimental and simulated R-curve the ductile tearing was not successfully achieved. Insufficient calibrated parameters as a result non-uniqueness problem of single specimen method were found.
Úplný záznam

Chcete být upozorněni, pokud se objeví nové záznamy odpovídající tomuto dotazu?
Přihlásit se k odběru RSS.
Digitální repozitář :: Hledej :: Nový záznam :: Personalizace :: Nápověda
Powered by Invenio v1.1.2
Spravuje admin.invenio@techlib.cz
Tato stránka je dostupná také v následujících jazycích:
Česky  English